The ME-6100 series of the high shear bottom of the tank mixers present a highly hygienic solution for the processes of dispersion, emulsifying, homogenisation and disintegration of solids in the food-processing, cosmetics, pharmaceutical and fine chemistry industries.
These mixers can be used either in open or closed tanks at atmospheric pressure or under pressure/vacuum.
The bottom of the tank mixers are designed for the applications of the highly viscous media and intended for work with anchor type agitators.
ME 6100 Tank Bottom Mixer
ME 6100 Tank Bottom Mixer
Request information
ME 6100 Tank Bottom Mixer
Request information
ME 6100 Tank Bottom Mixer
Operating principle
The high speed and adjusted tolerances between the rotor and the stator result in high suction potential, the product is suctioned and driven to the centre of the head.
The product is suctioned from the upper part of the head and the rotor thrusts it radially. Passing through the opening of the stator the product is mechanically sheared, the particles are sheared by the rotor at high speeds. And finally this flow is hydraulically sheared leaving the stator through the slots at a high speed.
Design and features
High shear, particle size reduction to less than 100 microns.
Access to the mechanical seal from the inside of the tank.
Single sanitary mechanical seal.
Possibility to replace the stator without disassembling the mixer.
The circulation is promoted as the stator is geometrically higher than the rotor.
Different model of stators are easily interchangeable.
Motors: IEC B5, IP 55, F-class insulation.
Easy cleaning and sterilisation (CIP/SIP).
Slotted head.
Materials
Parts in contact with the product 1.4404 (AISI 316L)
Other steel parts 1.4301 (AISI 304)
Gaskets in contact with the product EPDM
Mechanical seal C/SiC/EPDM
Surface finish
Internal Ra ≤ 0,8 μm
Documents
Data sheet (4)
Instruction manual (7)
Operating principle
The high speed and adjusted tolerances between the rotor and the stator result in high suction potential, the product is suctioned and driven to the centre of the head.
The product is suctioned from the upper part of the head and the rotor thrusts it radially. Passing through the opening of the stator the product is mechanically sheared, the particles are sheared by the rotor at high speeds. And finally this flow is hydraulically sheared leaving the stator through the slots at a high speed.
Materials and Options
Parts in contact with the product 1.4404 (AISI 316L)
Other steel parts 1.4301 (AISI 304)
Gaskets in contact with the product EPDM
Mechanical seal C/SiC/EPDM
Surface finish
Internal Ra ≤ 0,8 μm
Documents
| Document № | 03.600.33.01ES |
| Title | Mixer de Fondo ME -6100 |
| File type | |
|
|
| Document № | 03.600.33.01EN |
| Title | Tank Bottom Mixer ME-6100 |
| File type | |
|
|
| Document № | 03.600.33.01FR |
| Title | Mélangeur de fond ME-6100 |
| File type | |
|
|
| Document № | 03.600.33.01RU |
| Title | Донный Миксер ME-6100 |
| File type | |
|
|
| Document № | 03.600.30.02ES |
| Title | INSTRUCCIONES DE INSTALACION, SERVICIO Y MANTENIMIENTO MIXER DE FONDO SERIE 6100 |
| File type | |
|
|
| Document № | 03.600.30.04ES |
| Title | INSTRUCCIONES DE INSTALACION, SERVICIO Y MANTENIMIENTO MIXER DE FONDO SERIE 6100 - ANEXO ATEX |
| File type | |
|
|
| Document № | 03.600.30.02EN |
| Title | INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS TANK BOTTOM MIXER SERIE 6100 |
| File type | |
|
|
| Document № | 03.600.30.04EN |
| Title | INSTALLATION, SERVICE AND MAINTENANCE INSTRUCTIONS TANK BOTTOM MIXER SERIE 6100 - ANNEX ATEX |
| File type | |
|
|
| Document № | 03.600.30.02FR |
| Title | INSTRUCTIONS RELATIVES À L’INSTALLATION, À LA MISE EN SERVICE ET À LA MAINTENANCE MIXEUR DE FOND ME-6100 |
| File type | |
|
|
| Document № | 03.600.30.04FR |
| Title | INSTRUCTIONS RELATIVES À L’INSTALLATION, À LA MISE EN SERVICE ET À LA MAINTENANCE MIXEUR DE FOND ME-6100 - ANNEXE ATEX |
| File type | |
|
|
| Document № | 03.600.30.02RU |
| Title | ИНСТРУКЦИИ ПО УСТАНОВКЕ, ЭКСПЛУАТАЦИИ И ОБСЛУЖИВАНИЮ ДОННЫЙ МИКСЕР ME-6100 |
| File type | |
|
|
